| Kee AnchorTM There is a Legal Requirement to
Ensure a Safe and Efficient Maintenance Regime
for People Working at Heights.
Without a correctly tested and installed system, you can be held
personally responsible for the safety of your personnel
|
|
| |  |  | | | | • The Kee Anchor system has been independently tested by Lloyds British, and Apave, both leading Independent Test Houses, is CE approved for safety assurance and exceeds European Safety Requirements.
• Tested to conform to NF EN 795:1996/Amendment A1:December 2000 (equivalent to pr EN 795:2003), BS 7883 part E and ISO 14567.
• The Kee Anchor system can be used on roofs up to a 5 degree slope
• Multi purpose weights can be used with the KeeGuard roof edge protection system
• Suitable for use on Mineral Felt and Single Ply Membrane roof surfaces
• Corrosion resistant for long lasting service life
• Easy to assemble.
• Suitable for use with lanyards and Energy Absorption devices conforming to EN354, EN355, and EN360
• The Kee Anchor system is supplied by an ISO 9001 Quality Assured Company
The Kee Anchor system is a modular dead weight anchor,
for use with Personal Protection Equipment conforming to EN 795: 1996 Class E
and can be used on mineral felt and single ply membrane.
| | |  |  | | | It is designed for use on roofs where there are no permanent guardrails, such as KeeGuard®, or other anchor devices, in order to allow safe freedom of movement around the roof space. The Kee Anchor system offers the solution to the problem of minimal time maintenance operations for those jobs requiring occasional roof access. The system's modular components have been designed for ease of assembly on site and for transporting the system to site.
Another bonus of the Kee Anchor system is that the weights are interchangeable with the KeeGuard system, thus ensuring safety whilst fitting a KeeGuard system and ease of disassembly as the weights can be integrated into the KeeGuard system. For added safety all of the weights that come into contact with the roof are fitted with protective anti-slip rubber pads.
The Kee Anchor system offers a low maintenance , reliable and simple to assemble answer to working at heights requiring no drilling, special anchorage or penetration of the roof membrane. All components are zinc coated to ensure long lasting corrosion resistance and the grubscrews used in the system are case hardened featuring KeeKoat® protection.
The Kee Anchor modular design takes the complexity and cost out of working at heights – for good!
To veiw or download any of our brochures please click HERE. |
|
This Category is currently empty
|
|
|
